Earlier in they year, I had ordered a new drum sander. It took a few months to be delivered, but I finally have the Supermax 19-38 in my shop. In November, I built a dedicated rolling cabinet for the drum sander and it now is the time to see how well the cabinet works out. I also took some time to properly assemble and calibrate the sander.
Continue reading setting up supermax 19-38Tag Archives: assembly
Installing Oneida V-System 3000 Dust Collector
My current dust collector has has worked pretty well at collecting chips and some fine dust. Although, I have always felt it was a bit lacking and could be improved. After some time investigating solutions online, I settled on the Oneida V-System 3000. Continue reading Installing Oneida V-System 3000 Dust Collector
Birch Bench 9: Leg Mortises, Sliding Deadman Slot and Assembly
The next stage of the build was to mortise out the top for the legs, route the slot for the sliding deadman assemble everything. Continue reading Birch Bench 9: Leg Mortises, Sliding Deadman Slot and Assembly